Commercial Wall Photo Printers
Video For Machine
1.The machine has good compatibility and widely use.It can print the picture (design) on any wall.
2.The wall printer is fast and low-cost. No need film. Any output software and document are supported.
3.There is a professional color management software.The color can change at any time and no need to pay extra cost.
4. Full color image can complete at once. The gradients of image will shows prefect.
5. You can master all of skills within 1 or 2 days. No need any professional knowledge.
6.The wall printer machine is controlled by computer. Without plate and the need for an operator. Easy operation and maintenance.
7.High precision and perfect printing: The printer use special ink shows the image very lifelike. The final image is waterproof ,sunscreen and wear resistance.
8.The wall printer machine use closed and continuous ink system. You can add the ink conveniently.This design can avoid the dust into the system and can protect the ink of ejecting head flow fluency to minimize the print cost.
9.Meet the public demands for environmental protection and their healthy care. Unlike traditional decoration materials will release a lot of toxic gases, acrid smell lingering
||YC-S25OP vertical Wall printers
||1.5 x N(w) x 254(h) x 65(d)cm, customized for machine height below 3M
||2.1M height,, no limit width
||oil-based pigment ink
||4 color, 60ml ink tank
||Wall, Paper, Canvas, Glass, Ceramic, Leather
||360x720dpi, 720X720dpi, 720X1440dpi
||360dpi, 540dpi, 720dpi, 1080dpi, 1440dpi
||EN-RTL, HP-RTL, HP/GL-2 raster combine
||RJ45 net connector
||90-246V AC, 47-63HZ
||no-load 20W, ordinary 185W, maxi 285W
||Ready mode<20dBA, Printing<72dBA
||2pass:12 sqaure meters per hour
|4pass:8 sqaure meters per hour
Q: why can the machine print only up to 2.1 M ??
A: The assembled machine height is 2.64 m under this condition.It is the most suitable height ,which can ensure our machine can be erected indoor.Meanwhile because we are the manufacturer, if there is enough height indoor or you just want to print outdoor,any height can be customized as your requirement.
Q: why do we use Synthetic ink ??
A: 1)Easily absorbed by the wall completely.
2) The perfect color effect on the wall
3) It would not cause the print head block and corrode the ink system
4) RoHs certification,satisfy the public's environmental protection requirements
Warmly note:In order to keep the final painting pictures for longer,we advice our customer to do a protect cover using the paint.By doing this,the final painting is not only waterproof ,but also sunscreen and wear resistance it would last for over 10 years indoor and outdoor.
Q: Is it complicated to operate your wall printing machine ?
A: No, it is totally automatic.Everyone can master all of skills within 1 or 2 days. No need of any professional knowledge.
1. Pre-sale services:
Act as a good assistant of clients enable them to get rich and generous returns on their investments.
1>. Select equipment model;
2>. Design and manufacture products according to clients' special requirement;
3>. Train technical personnel for clients.
2. Services during the sale:
1>. Pre-check and accept products ahead of delivery;
2>. Help clients to draft solving plans.
3. After-sale services:
Provide considerate services to minimize clients' worries.
1>. Assist clients to prepare for the first construction scheme;
2>. Install and debug the equipment;
3>. Train the first-line operators;
4>. Examine the equipment;
5>. Take initiative to eliminate the troubles rapidly;
6>. Provide perfect service;
7>. Provide technical exchanging